Crate Amplifiers BFX-220H - Manual (Page 8)

BFX-220H Bass Amplifier
with D igital S ignal P rocessing
©2001 SLM Electronics • 1400 Ferguson Avenue • St. Louis, MO 63133 U.S.A.
www.crateamps.com
Technical Specifications:
Maximum Input Signal Level Accepted 17 volts peak to peak (-15dB switch depressed)
Input Impedance 500k ohms (-15dB switch out), 75k ohms (-15dB switch depressed)
Signal to Noise Ratio 75dB typical
Output Power Rating 160 watts RMS @ < 5% THD, 8 ohm load, 120VAC line
220 watts RMS @ < 5% THD, 4 ohm load, 120VAC line
Gain @ 1kHz 67dB with EQ flat, Contour off
EQ Section 20dB range (±10dB) @ 40Hz, 100Hz, 225Hz, 625Hz, 1.6kHz, 4kHz,
8kHz and 16kHz
Power Requirements 110-120VAC, 60 Hz250VA
110-115VAC, 50/60 Hz250VA
230VAC, 50/60 Hz250VA
Size and Weight 7-1/8” H x 19-1/2” W x 12” D, 30 lbs
Crate continually develops new products, as well as improves existing ones. For this reason,
specifications and information in this manual are subject to change without notice.
47-589-52 • 08/01
Declaration Of Conformity
#34, Effective 01-01-2001
Manufacturer’s Name: SLM Electronics
Production Facility: 11880 Borman Drive, St. Louis, MO 63146, USA
Production Facility: 700 Hwy 202 W, Yellville, AR 72687, USA
Shipping Facility: 1400 Ferguson Ave., St. Louis, MO 63133, USA
Office Facility: 1400 Ferguson Ave., St. Louis, MO 63133, USA
Product Type: Audio Amplifier
Complies with Standards:
LVD: 92/31/EEC, 93/68/EEC, & 73/23/EWG
Safety: EN60065
EMC: EN55013, EN55020, EN55022, EN61000-3-2,
& EN61000-3-3
Supplementary information provided by your local Sales & Services Office or:
SLM Electronics - R & D Engineering
1901 Congressional Drive, St Louis, MO 63146, USA
Tel.: 314-569-0141, Fax: 314-569-0175