BlueAnt Z9 Bluetooth Headset - Manual (Page 17)

ENGLIS
H
Note:
Standby Mode
means connected
to a device but
not on a call.
Idle Mode
means the Z9
is ON but not
connected to any
device
Multiple
button presses
mean click
together
Z9 Function Button Time Status
Power ON MFB 3 Seconds From OFF
Power OFF MFB 3 Seconds Idle/Standby
Enter Pairing Mode MFB 6 Seconds From OFF
Connect to Device 1 MFB One Click Idle
Connect to Device 2 MFB Two Clicks Idle
Connect to Device 3 MFB Three Clicks Idle
Answer Call MFB Click Ringing
End Call MFB 3 Seconds Active Call
Reject Call MFB 3 Seconds Ringing
Redial Last Number Vol 3 Seconds Standby
Voice Dial Activate MFB Click Standby
Disconnect/ Transfer
&
Click Connected
Call Conference Vol 3 Seconds Active Call
Call Waiting & 3 Seconds Active Call
Volume Up Vol Click Active Call
Volume Down Vol Click Active Call
Mute Vol 3 Seconds Active Call
Turn LED’s OFF/ON
&
3 Seconds Idle/Standby
Switch Voice Isolation
between Standard and Max MFB Click Active Call
Reset Device MFB & & Click Idle
Button Function
Matrix