Cambridge SoundWorks PCWorks Speaker System - Manual (Page 8)

Subwoofer/amplifier
Satellite Speaker Cubes (2) with 12 ft. speaker wire attached
Stands for cubes (2)
Volume Control with 12 ft. audio
connecting cable and stereo mini-plugs*
Semipermanent
mounting strip
(1) for attaching
volume control
DC Power Adapter
(2) Hook& Loop
fasteners for the
satellite cubes
(one each)
S OUND
W
OR
K
S
TO SUB
FROM SOURCE MIN MAX
For your convenience, an overall
wiring diagram appears on page 13.
One of the first steps in setting
up PCWorks is
connecting the small
“cube” satellite
2
Examine each speaker unit carefully
for shipping damage. If there is any,
do not install or use the system. For
advice, call the store where you made
your purchase. All the items shown in the
illustration below should be included
with your system. If anything is
missing, notify your retailer.
Save the carton and its inserts in
case you need to ship or move your
PCWorks system later.
Inspecting For Damage Getting Started
speakers to the subwoofer. Note
the red band around one lead at
the end of each speaker cable.
This will help you connect speak-
ers “in phase” as described on
the next page.
Red
band