BE Pressure supply 8 Gallon Wheeled Electric Air Compressor AC1511B - Manual (Page 12)

12
operation
&
installation
5) The solvents Trichloroethane and Methylene Chloride can chemically
react with aluminium used in paint spray guns, paint pumps, etc, and
cause an explosion. If you are using these solvents, use only stainless
steel spray equipment. This does not affect your air compressor, but
may affect the equipment being used.
6) Never use an electric air compressor outdoors when it is raining or on
a wet surface, as it may cause an electric shock.
7) Do not weld on the air tank of this compressor. Welding on the air
compressor tank strength and cause an extremely hazardous condition.
Welding on the tank in any manner will void the warranty.
8) This unit starts automatically. ALWAYS shut off the compressor,
remove the plug from the outlet, and bleed all pressure from the system
before servicing the compressor, and when the compressor is not in
use.
9) High temperatures and moving parts are present under Enclosure. To
prevent burns or other injuries, DO NOT operate with the Enclosure
removed. Allow the compressor parts to cool before handling or
servicing.
10) Be certain to read all the labels when you are spraying paints or toxic
materials, and follow the safety rules. Use a respirator mask if there is
a change of inhaling anything you are spraying. Read all instructions
and be sure that your respirator mask will protect you.
11) Always wear safety goggles or classes when using an air
compressor. Never point any nozzle or sprayer toward a person or
any part of the body.
12) Do not adjust the pressure switch or relief valve for any reason. Doing
so voids all warranties. They have been pre-set at the factory for the
maximum pressure of this unit.