BE Pressure supply 10 Gallon Vertical Air Compressor AC2010 - Manual (Page 17)

17
CAUTION
Do not attach air tools to open end of the hose until start-up is com-
pleted and the unit checks out OK.
operation
OPERATION AND ADJUSTMENT
1）The compressor is controlled by pressure switch when normal work-
ing. It can be stopped automatically as pressure increasing to the max
and restart as pressure decreasing to the min. The rated pressure has
been adjusted when produced. Don’t change it carelessly. As soon as
motor switched off the compressed air in the discharge pipe should be
released through the release valve under the switch. This is the necessary
condition for restart, or the motor will be damaged. The rated pressure
can be adjusted by turning the adjusting bolt of the switch (Fig.3).
2）The output pressure of compressed air can be adjusted by regulating
valve. Pull up the knob of regulation valve and turn it clockwise or coun-
terclockwise to increase or decrease the pressure (Fig.3).
3）The the compressor in running need be stopped only set the knob of
pressure switch in positing off.
FIG. 3
ADJUSTING SCREW