Creating a route, Navigate a route – B&G Zeus 12 User Manual
Page 6
Creating a route
Press the
1
PLOT
key and select the new route option
Use the arrow keys to move the cursor to the position for the
2
first waypoint
Confirm the position by pressing the rotary knob
3
Move the cursor to the position for the next waypoints, and
4
confirm the position by pressing the rotary knob again
Repeat moving the cursor and pressing the rotary knob until
5
all waypoints in the route are created
Press the
6
MENU
key to save the route
The Edit route mode and route information is indicated on top of the panel
until the route is saved.
You can also create a route from the Routes table or by converting a track to a route.
Refer to the Utilities pages in the Zeus8/Zeus12 Operator manual.
Navigate a route
You can navigate towards a waypoint or along a predefined route. As
soon as a route or a destination point is selected, you can switch to the
Steer panel to see navigation info.
PLOT
GO TO
MARK
VESSEL
PLOT
GO TO
MARK
VESSEL
NAV
*988-0186-02A*
www.bandg.com