Amico Security Recessed Console Box Assembly User Manual

Page 4

The console should be fl ush with the fi nished drywall after installation (see Fig. 1). Check the positioning

of the fl anges to determine if adjustment of the fl anges is necessary. If adjustment is not required, skip

steps 4 through 8, and proceed with step 9.

NOTE: The fl anges are preset for 5/8” drywall.

Remove any aluminum device covers that are blocking access to the screws (2 per fl ange) holding the

fl ange to the console box. This is done by loosening the screws (typically 2 per cover) attaching it to the

console box. Place everything in a safe and clean location.

Fig. 1

CONSOLE BOX
END CAP

FLANGE

DRYWALL

STUD

CONSOLE BOX

NOTE 1:
Mounting hardware
(rivets or screws)
by others

Amico Pipeline