Amico Regal Series Surface Mounted Vertical Flatwall - Manual (Page 6)

5 Amico Architectural
Hang the unit over the hanging bracket. Secure the unit through lower rear bracket to wall.
Ensure hanging bracket is secured to wall studs. Use similar hardware as previously used to
secure hanging bracket.
Make all electrical and piping connections. Electrical services are terminated at junction boxes.
Medical gas pipes are terminated as per shop drawings.
Replace laminate panels removed in step 1 .
Dimensions above finished floor for lower bracket vary for each type of flatwall. Please contact
Amico if exact dimensions are required for blocking purposes.
4.
5.
6.
Note
flatwall securing locations