beautypg.com

Amico LDR Headwall User Manual

Page 7

background image

www.amico.com

6

Have all front access panels for your unit ready. Pull all electrical devices out of the boxes. Put

one access panel on the cabinet and match the cut-outs with the device positions. Repeat for
the other panels. Adjust cabinet position, if needed, to ensure proper alignment.

Holding the front panel in the correct position, surface mount the devices in place and then

secure the cover to the cabinet. Drill pilot holes and attach with hardware provided.

Install device cover plates.

Insert trim caps where necessary.

Install any accessories using hardware provided (if applicable).

6.

7.

8.

9.

10.