Great Plains 3PD30 Parts Manual - Manual (Page 127)

Revision Comments Part Description Part No. Ref.
Image No. dwg17405
3rd rev. Included in 122-103S and 122-104S. BRG INS .63IDX1.57OD DBL LIP 822-095C 1.
2nd rev. RPBY 822-095C 822-088C 1.
1st rev. Included in 122-033S and 122-039S. BEARING 822-029C 1.
2nd rev. Included in 122-103S and 122-104S. 803-184 FLG TP LK 5/16-18ZNYCR 803-177C 2.
1st rev. Included in 122-033S and 122-039S. NUT HEX 5/16-18 PLT 803-008C 2.
4X12 PW RIM HALF 122-041D 3.
4 X 12 RIM SPACER RING 817-023C 4.
4 X 12 LARGE SPREADER TUBE 817-022C 5.
TIRE 4 X 12 PW SMOOTH CROWN 814-021C 6.
2nd rev. Included in 122-103S and 122-104S. 4X12 SMALL SPREADER TUBE-SHORT 122-094D 7.
1st rev. Included in 122-033S and 122-039S. 4 X 12 SPREADER TUBE SHORT 122-043D 7.
HHCS 5/16-18X3 3/4 GR5 802-119C 8.
2nd rev. Includes items 1 through 8. 4X12 SMOOTH CROWN PW ASSY 122-104S 9.
1st rev. Includes 804-009C and items 1
through 8.
RPBY 122-104S 122-039S 9.
HHCS 5/8-11X4 1/4 GR5 802-151C 10.
WASHER LOCK SPRING 5/8 PLT 804-022C 11.
TIRE PW 4 X 12 814-010C 12.
2nd rev. Includes items 1 through 5, 7, 8, and
12.
4X12 V-GROOVE PRESS WHL ASSY 122-103S 13.
1st rev. Includes 804-009C and items 1
through 5, 7, 8, and 12.
RPBY 122-103S 122-033S 13.
3rd rev. 4X12 PRESS WHEEL ARM 122-062H 14.
2nd rev. Includes 122-062H, 122-071D,
802-174C, 803-078C, 804-011C.
84 4X12 PW LEVER TUBE FIELDFIX 122-072A 14.
1st rev. 1984. REPLACED BY 122-072A 122-047H 14.
2nd rev. 1985 <-> 1990. NUT LOCK 3/8-16 NYLON INSERT 803-078C 15.
1st rev. 1984. NUT LOCK 3/8-16 PLT 803-013C 15.
1985 <-> 1990. WASHER FLAT 3/8 SAE PLT 804-012C 16.
1985 <-> 1990. S.R. END SPACER 4X12 & 2X13 SG 121-092D 17.
2nd rev. 1985 <-> 1990. HHCS 3/8-16X4 3/4 GR5 SPTHD 802-174C 18.
1st rev. 1984. HHCS 3/8-16X4 1/2 GR5 802-027C 18.
NUT-HEX 1/4-20 PLT 803-006C 19.
WASHER LOCK SPRING 1/4 PLT 804-006C 20.
1985 <-> 1990. SPRING ROD CENTER SPACER TUBE 121-091D 21.
PIN ROLL 5/32 X 1 805-073C 22.
SCREW ADJUSTMENT ROD 122-055S 23.
KNOB P.W. ADJUSTMENT 817-021C 24.
SLIDE TRUNNION 122-061D 25.
NUT HEX SLOTTED 7/16-14 PLT 803-069C 26.
PIN COTTER 7/64 X 1 LONG 805-064C 27.
2nd rev. SCREW ADJ TENSION SPRING BENT 807-066C 28.
1st rev. RPBY 807-066C 122-066D 28.
TENSION SPRING RETAINER 122-065D 29.
SCREW RD HD 1/4-20 X 5/8 801-018C 30.
RHSNB 3/8-16X1 GR5 802-015C 31.
2nd rev. D.D. SLOTTED SCRAPER 107-113D 32.
1st rev. RPBY 107-113D 107-075D 32.
WASHER LOCK SPRING 3/8 PLT 804-013C 33.
NUT HEX 3/8-16 PLT 803-014C 34.
12/26/12 - 127 - 118-262D-h
Table of Contents Part Number Index
Press Wheels
4" x 12" Press Wheel (1984 <-> 1990)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)