Great Plains Detracker Assembly Instructions - Manual (Page 3)

Great Plains Manufacturing, Inc. iii
02/24/2014 589-386Q
© Copyright 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 All rights Reserved
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been
taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for
damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as
it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Trademarks of Great Plains Manufacturing, Inc. include: Singulator Plus, Swath Command, Terra-Tine.
Registered Trademarks of Great Plains Manufacturing, Inc. include:
Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone, Nutri-Pro, Seed-Lok, Solid Stand,
Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo Max, Turbo-Till, Ultra-Till, Verti-Till, Whirlfilter, Yield-Pro.
Brand and Product Names that appear and are owned by others are trademarks of their respective owners.
Table of Contents
General Information .....................................................1
Tools Required ...............................................................1
Pre-assembly Checklist..................................................1
Document Family ...........................................................1
Product Support......................................................1
Assembly ......................................................................2
Before You Start.............................................................2
Install Detracker Frame Assembly .................................2
Detracker Frame Assembly Parts...............................2
Install Detracker Spring Assembly .................................3
Detracker Spring Assembly Parts ................................. 3
Install Coulter Hub Assembly ......................................... 4
Coulter Hub Assembly Parts .......................................... 4
Prior Going To The Field................................................ 5
Detracker Placement.............................................. 5
Detracker Adjustments ........................................... 5
Spring Adjustment .................................................. 5
Detracter Height Adjustment .................................. 5
Torque Value Chart........................................................ 6