4 wing walking beam, Great plains mfg., inc – Great Plains 7344 Series VII Field Cultivator-Rigid Hitch Parts Manual User Manual
Page 21
1/31/2005
Series VII 7332-7344 Field Cultivator, Rigid Hitch 560-198P
3-4
Wing Walking Beam
Ref. Kent No. GP Part No. Part Description
Comments
1.
FC0347
550-015D
Spindle, 2 x 8 1/16 (Q888)
2.
FC0372 816-398C Seal,
(CR16286)
3.
FC0250
816-396C
Wear Sleeve, (CR081071)
4.
FC0373
822-198C
Inner Cone, (JL69349)
5.
FC0371
822-197C
Inner Cup, (JL69310)
6.
FC1636 560-035H Walking
Beam
7.
FC0514
800-080C
Grease Zerk, 1/4-28 Thread Forming
8.
FC0426
822-020C
Outer Cup, (LM67010)
9.
FC0248
822-021C
Outer Cone, (LM67048)
10.
FC0251
804-055C
Washer, Spindle 7/8
11.
FC0253
805-089C
Cotter Pin, 5/32 x 1 1/2
12.
FC0252
803-029C
Slotted Hex Nut, 7/8-14
13.
FC0254 890-781C Dust
Cap
14.
o 815-216C
Hub 6-Bolt Spindle 2X14 888
Purchased Complete
FC1206 n 550-005S
Replaced by 815-216C
Front Side of Tandem. See Pg. 3-5
15.
o 815-214C
Hub 6-Bolt Spindle 2X13 888
Purchased Complete
FC1334 n 550-007S
Replaced by 815-214C
Back Side of Tandem. See Pg. 3-5
16.
210548
805-324C
Clevis Pin, 5/16 x 3 w/cotter
17.
260216
805-363C
Cotter Pin, 1/8 x 1
18.
FC1646
560-137L
Walking Beam Hub Assembly
Includes items 1 thru 17
19.
FC0360
814-220C
Rim, 15 x 6, 6-bolt
20.
FC1762
814-011C
Tire, 9.5L x 15, 8 ply
21.
FC2274
814-230C
Tire/Wheel Assembly, 9.5L x 15, 8 ply
Includes items 19 & 20
22.
120820
802-632C
Lug Bolt, 1/2 x 1 1/4
Legend: n = 1st revision; o = 2nd revision, p = 3rd revision;
● use up existing stock; ⊗ not interchangeable; ⊗coRevision 2 is not interchangeable with 1