Great Plains 3PD30 Parts Manual - Manual (Page 9)

Revision Comments Part Description Part No. Ref.
Image No. dwg16513
12'-3PT FRAME WELDMENT 117-015H 1.
14'-3PT FRAME WELDMENT 117-016H 1.
15'-3PT FRAME WELDMENT 117-017H 1.
20'-3PT FRAME WELDMENT 117-018H 1.
WASHER FLAT 1/2 SAE PLT 804-016C 2.
HHCS 1/2-13X1 3/4 GR5 802-082C 3.
WASHER LOCK SPRING 1/2 PLT 804-015C 4.
NUT HEX 1/2-13 PLT 803-020C 5.
12'-3PT BOX WELDMENT 118-154H 6.
14'-3PT BOX WELDMENT 118-155H 6.
15'-3PT BOX WELDMENT 118-156H 6.
20'-3PT BOX WELDMENT 118-157H 6.
30'-3PT BOX WELDMENT RH 118-158H 6.
30'-3PT BOX WELDMENT LH 118-159H 6.
27' 3 POINT BOX WELDMENT RH 118-195H 6.
27' 3 POINT BOX WELDMENT LH 118-196H 6.
U-BOLT 1/2-13 X 3 17/32 X4 3/4 806-002C 7.
U-BOLT 5/8-11 X 3 17/32 X 5 806-006C 8.
SIGHT GLASS GASKET 816-013C 9.
GRAIN LEVEL SIGHT GLASS 817-007C 10.
CORNER SIGHT GLASS 817-030C 10.
SIGHT GLASS RETAINER 175-043D 10.
WASHER INTERNAL STAR #10 PLT 804-004C 11.
NUT HEX 10-24 PLT 803-001C 12.
HHCS 1/2-13X5 GR5 802-045C 13.
PIN HITCH 1 1/8 X 4 11/16 USEL 805-008C 14.
2nd rev. For 3PD27 and 3PD30 drills. PIN HITCH 1 7/16 X 8 3/8 PLT 805-168C 14.
1st rev. For 3PD27 and 3PD30 drills;
Re-placed by 805-168C.
PIN, HITCH,1 7/16 X 6 5/16 PLT 805-087C 14.
BOLT ON LOWER HITCH RH 117-118D 15.
LOWER HITCH SPREADER TUBE 117-121D 16.
BOLT ON LOWER HITCH LH 117-117D 17.
WASHER LOCK SPRING 5/8 PLT 804-022C 18.
NUT HEX 5/8-11 PLT 803-021C 19.
VINYL SEAL 3/8 X 5/8/FT 816-001C 20.
VINYL SEAL 3/8 X 1/2 (PER FT) 816-004C 21.
PIN HITCH 1 X 3 3/8 USABLE LG 805-007C 22.
SCREW RD HD SLT 10-24X1/2 PLT 801-003C 23.
(S/N 1315E <-> 1379E.) Use with 00
Series Opener.
27' 3-PT FRAME WELDMENT 117-043H 24.
(S/N 1170S <-> 1206S.) Use with 00
Series Opener.
30' 3-PT FRAME WELDMENT 117-044H 24.
(S/N 1314E-) 27'-3PT FRAME WELDMENT 117-019H 24.
(S/N 1169S-) 30 FT. 3-PT. FRAME WELDMENT 117-013H 24.
12/26/12 - 9 - 118-365P
Table of Contents Part Number Index
Box Assembly
Box To Frame
(Applies to 3PD12 (1991-1993), 3PD14 (1991-1993), 3PD15 (1991-1993), 3PD20 (1991-1993) only)