Important safety information, Transport machinery safely, Avoid high pressure fluids – Great Plains 7560 Series VII Field Cultivator-Floating Hitch Operator Manual User Manual
Page 5

Great Plains Mfg., Inc.
Important Safety Information
5/01/2003
Series VII 7551-7560 Field Cultivator, Floating Hitch 560-201M
3
 
 
Transport Machinery Safely
Maximum transport speed for implement is 20 
mph. Some rough terrains require a slower 
speed. Sudden braking can cause a towed load 
to swerve and upset. 
 
• Do not exceed 20 mph. Never travel at a
speed which does not allow adequate 
control of steering and stopping. Reduce 
speed if towed load is not equipped with 
brakes. 
• Comply with state and local laws. 
• Do not tow an implement that, when fully 
loaded, weighs more than 1.5 times the 
weight of towing vehicle. 
• Carry reflectors or flags to mark tractor and
implement in case of breakdown on the 
road. 
• Keep clear of overhead power lines and
other obstructions when transporting. Refer 
to transport dimensions under 
“Specifications and Capacities,” page 58. 
• Do not fold or unfold the wings while the
tractor is moving.
 
 
Avoid High Pressure Fluids
Escaping fluid under pressure can penetrate the 
skin, causing serious injury. 
 
• Avoid the hazard by relieving pressure
before disconnecting hydraulic lines.
• Use a piece of paper or cardboard, NOT
BODY PARTS, to check for suspected 
leaks. 
• Wear protective gloves and safety glasses
or goggles when working with hydraulic 
systems. 
• If an accident occurs, see a doctor immedi-
ately. Any fluid injected into the skin must be 
surgically removed within a few hours or 
gangrene may result. 
