Great Plains 3S-5000HDF Parts Manual - Manual (Page 33)

Revision Comments Part Description Part No. Ref.
Image No. dwg34256
Used with Wing Section 5000 SPILL FLAP 175-474D 1.
Used with Center Section 5000 SPILL FLAP 175-470D 1.
RUBBER BELTING SEAL STRIP 816-278C 2.
RIVET SS 1/8 DIA 800-012C 3.
WASHER FLAT 1/4 SAE PLT 804-007C 4.
HHCS 1/4-20X5/8 GR5 802-078C 5.
Used with Wing Section RUBBER BELTING HINGE 17 816-744C 6.
Used with Center Section RUBBER BELTING HINGE 15 EW 816-743C 6.
HFSS 1/4-20X1 GR5 802-375C 7.
Used with Wing Section 5000 HINGE CLAMP STRIP END 195-383D 8.
Used with Center Section 5000 DIVIDER CLAMP ANGLE 175-472D 8.
Used with Wing Section 5000 DIVIDER CLAMP ANGLE 175-475D 9.
Used with Center Section 5000 DIVIDER CLAMP ANGLE 175-471D 9.
NUT HEX LOCK 1/4-20 FLG 803-088C 10.
TOP BAR PARTITION BRACE 195-192D 11.
5000 DIVIDER CLAMP WASHER 175-473D 12.
Used with Wing Section 5000 HINGE CLAMP STRIP END 195-382D 13.
Used with Center Section 5000 HINGE CLAMP STRIP END 195-379D 13.
5000 HINGE CLAMP STRIP CENTER 195-380D 14.
(SHOWN) LH Wing Includes
items:1-14
5000 SPILL FLAP SUB ASSEMBLY 175-305S 15.
LH Center Includes items:1-14 5000 SPILL FLAP SUB ASSEMBLY 175-303S 15.
(SHOWN) RH Wing Includes
items:1-14
5000 SPILL FLAP SUB ASSEMBLY 175-306S 16.
RH Center Includes items:1-14 5000 SPILL FLAP SUB ASSEMBLY 175-304S 16.
08/20/14 - 33 - 195-325P
Table of Contents Part Number Index
Box and Frame Assembly
Fertilizer Spill Flap
(Applies to 3S-5000, 3S-5000F, 3S-5000HD, 3S-5000HDF only)