Great Plains 2015 Parts Manual - Manual (Page 55)

Revision Comments Part Description Part No. Ref.
Image No. dwg12145
Rev. 3 is not interchangeable
w/rev. 2
January 1998+. 1 X 12 PRESS WHL ASSY-5203BRG 814-174C 1.
Rev. 2 is not interchangeable
w/rev. 1
April 1996<->December 1997 1 X 12 PLANTER PW ASSY 814-154C 1.
1st rev. March 1996- RPBY 814-154C 405-004S 1.
Rev. 3 is not interchangeable
w/rev. 2
Use with 814-174C. NUT HEX LOCK 1/4-20 FLG 803-088C 2.
Rev. 2 is not interchangeable
w/rev. 1
Use with 814-154C. NUT HEX FLNG T-LOCK 1/4-20 YLW 803-293C 2.
1st rev. Use with 405-004S. NUT-LOCK 1/4-20 PLT 803-007C 2.
Rev. 2 is not interchangeable
w/rev. 1
Use with 814-174C. 1 X 12 PRESS WHEEL RIM HALF 817-330C 3.
1st rev. Use with 814-154C & 405-004S. 1 X 12 MOLDED PRESS WHEEL RIM 817-081C 3.
TIRE RUBBER 1 X 12 814-034C 4.
Rev. 2 is not interchangeable
w/rev. 1
Use with 814-174C. BRG FLG 7/8HEX 3BOLT 822-171C 5.
1st rev. Use with 814-154C & 405-004S BEARING .760 BORE 205DD 188-007V 5.
HHCS 1/4-20X1 GR5 802-005C 6.
PW HANDLE CASTING 812-203C 7.
PW HANDLE TUBE 405-004D 8.
Rev. 2 is not interchangeable
w/rev. 1
Use with 814-173C. 25/32 PW SPACER 5/8 DIA 405-030D 9.
1st rev. Use with 814-152C & 405-004S. 1 1/8 PW SPACER 405-020D 9.
Rev. 2 is not interchangeable
w/rev. 1
Use with 814-173C. 1/4 PW SPACER 5/8 DIA 405-031D 10.
1st rev. Use with 814-152C & 405-004S. 1/4 PW SPACER 405-021D 10.
Rev. 2 is not interchangeable
w/rev. 1
Use with 814-173C. HHCS 5/8-11X4 1/4 GR5 802-151C 11.
1st rev. Use with 814-152C & 405-004S. HHCS 3/4-10X3 3/4 GR5 802-204C 11.
HHCS 1/2-13X1 3/4 GR5 802-082C 12.
PARALLEL ARM PIVOT TUBE 198-029D 13.
PARALLEL ARM PIVOT BUSHING 817-084C 14.
PW MOUNT CASTING 812-199C 15.
NUT HEX FLG. LOCK 1/2-13 PLT. 803-169C 16.
2nd rev. 1X12 PW ADJUSTER 405-032D 17.
1st rev. RPBY 405-032D 405-003D 17.
WASHER LOCK SPRING 1/2 PLT 804-015C 18.
HHCS 1/2-13X1 1/2 GR5 802-091C 19.
HHCS 1/2-13X1 GR5 802-258C 20.
SPRING EXT 1 7/8ODX8 3/8X.25W 807-113C 21.
PIN CLEVIS 7/16 X 3 17/64 USBL 805-183C 22.
PIN COTTER 5/32 X 1 PLT 805-019C 23.
Rev. 2 is not interchangeable
w/rev. 1
1X12 PW ARM WELDMENT 405-014H 24.
1st rev. PW ARM WELDMENT 405-003H 24.
Rev. 2 is not interchangeable
w/rev. 1
Use with 814-173C. NUT LOCK 5/8-11 PLT 803-024C 25.
1st rev. Use with 814-152C & 405-004S. NUT LOCK 3/4-10 PLT 803-026C 25.
05/14/12 - 55 - 173-088P
Table of Contents Part Number Index
Press Wheels
Press Wheel 1 X 12
(Applies to 2015 Soybean Machine (1995+) only)