Great Plains 7336 DH Operator Manual - Manual (Page 8)

4 7000 Series II Table of Contents Index Great Plains Manufacturing, Inc.
556-235M Table of Contents Index 2014-06-30
Practice Safe Maintenance
▲ Understand procedure before doing work. Use proper tools
and equipment. Refer to this manual for additional
information.
▲ Work in a clean, dry area.
▲ Lower the Disk Harrow, put tractor in park, turn off engine,
and remove key before performing maintenance.
▲ Make sure all system pressure is relieved.
▲ Disconnect battery ground cable (-) before servicing or
adjusting electrical systems or before welding on Disk
Harrow.
▲ Inspect all parts. Make sure parts are in good condition and
installed properly.
▲ Remove buildup of grease, oil or debris.
▲ Remove all tools and unused parts from Disk Harrow before
operation.
Safety At All Times
Thoroughly read and understand the instructions in this
manual before operation. Read all instructions noted on
the safety decals.
▲ Be familiar with all Disk Harrow functions.
▲ Operate machinery from the driver’s seat only.
▲ Do not leave Disk Harrow unattended with tractor engine
running.
▲ Do not dismount a moving tractor. Dismounting a moving
tractor could cause serious injury or death.
▲ Do not stand between the tractor and Disk Harrow during
hitching.
▲ Keep hands, feet and clothing away from moving parts.
▲ Watch out for wires, trees, etc., when folding and raising
Disk Harrow. Make sure all persons are clear of working
area.