Great Plains TC5319 Parts Manual - Manual (Page 17)

Revision Comments Part Description Part No. Ref.
Image No. dwg41156
CENTER FOLD BRACKET TC5313-15 566-008H 1.
Models 5313 & 5315 REBOUND VALVE PLATE 566-150D 2.
CENTER WING STOP TC5313-15 566-025H 3.
Models 5313 & 5315 BOLT ON WING PIVOT 566-053H 4.
HHCS 3/4-10X2 1/2 GR5 802-212C 5.
WASHER LOCK SPRING 3/4 PLT 804-023C 6.
NUT HEX 3/4-10 PLT 803-027C 7.
HHCS 5/8-11X1 1/2 GR5 802-051C 8.
WASHER LOCK SPRING 5/8 PLT 804-022C 9.
NUT HEX 5/8-11 PLT 803-021C 10.
WING SHIM 12GA 566-171D 11.
WING SHIM 16GA 566-172D 12.
Models 5313 & 5315 HHCS 3/4-10X1 1/2 GR5 802-184C 13.
Models 5313 & 5315 HHCS 3/4-10X3 1/2 GR5 802-066C 14.
Models 5313 & 5315 NUT LOCK 3/4-10 PLT 803-026C 15.
GREASE ZERK 1/4-28 THD FORMING 800-080C 16.
Models 5109-5115 RIGID SMV & LIGHT BRACKET 566-114H 17.
Models 5313 & 5315 REBOUND VALVE 810-622C 18.
HHCS 5/16-18X4 GR5 802-279C 19.
WASHER LOCK SPRING 5/16 PLT 804-009C 20.
NUT HEX 5/16-18 PLT 803-008C 21.
DECAL SLOW MOVING-GALV. BACKED 818-055C 22.
SCREW PAN HD 1/4-20 X 3/4 801-005C 23.
WASHER LOCK SPRING 1/4 PLT 804-006C 24.
NUT-HEX 1/4-20 PLT 803-006C 25.
07/14/14 - 17 - 566-046P
Table of Contents Part Number Index
Section 2: Frames
5109-5315 Center Fold Assembly
(Applies to TC5109 (S/N A1419X-), TC5111 (S/N A1419X-), TC5113 (S/N A1419X-), TC5115 (S/N A1419X-),
TC5313 (S/N A1419X-), TC5315 (S/N A1419X-) only)