Great Plains P18432E Operator Manual - Manual (Page 18)

SLD
Operating Instructions
18
2. Transportation / Installation
2.7 When driving on the
road
When driving on the road the machine must
be converted to the transportation position.
When driving on the road, raise
the machine completely to prevent
the working elements dragging on
the ground.
2.8 Parking the machine
In order to avoid damage as a result of
moisture, the machine should be parked, if
possible, indoors or under cover.
When manoeuvring the machine,
pay attention to your surroundings.
Ensure that nobody is in the
manoeuvring area (watch for
children!).
• Park the machine on level and solid ground.
• Fit chocks under the wheels
• Raise the machine and remove shims from
the lift axle cylinders.
• Lower the machine to the ground, ensuring
that it is stable.
• Remove the drawbar pin and drive forward
slowly until hitch is clear of tractor drawbar.
• Lower the drawbar to the ground.
• Switch off the tractor.
• Disconnect hydraulic lines from the tractor.
Fig. 2.01. Wheel chocks