Great Plains V-300F Parts Manual - Manual (Page 85)

Revision Comments Part Description Part No. Ref.
Image No. dwg23276
CP1000 MAIN DRIVE SHAFT 248-264D 1.
FCP1000 FEEDER CUP JACK SHAFT 248-407D 2.
PIN ROLL 1/4 X 1 1/2 LG PLT 805-180C 3.
WASHER LOCK SPRING 1/4 PLT 804-006C 4.
NUT-HEX 1/4-20 PLT 803-006C 5.
NUT HEX 1/2-13 PLT 803-020C 6.
WASHER LOCK SPRING 1/2 PLT 804-015C 7.
WASHER FLAT 1/2 USS HARD PLT 804-113C 8.
TUBE RND 1 OD X 7/32W X 2.13 120-306D 9.
IDLER 1 PC 2.38X1.01X1.062 817-406C 10.
HHCS 1/2-13X3 1/4 GR5 802-099C 11.
PIN LINCH 1/4 X 1 3/4 PLT 805-126C 12.
LH CHAIN SHIELD WLMT 148-735H 13.
CENTER CHAIN SHIELD WLMT 148-736H 14.
40-28T CALIBRATION SPKT ASY 148-723S 15.
SPKT 40C12 X 7/8 HEX BORE 808-219C 16.
SPKT 40B72 X 7/8 HEX BORE 808-258C 17.
SPKT 40B34 X 7/8 HEX BORE 808-257C 18.
SPKT 40C23 X 7/8 HEX BORE 808-256C 19.
SPKT 40B14 X 7/8 HEX BORE 808-259C 20.
CHAIN RL #40 120 PITCHES 136-155D 21.
CHAIN RL #40 86 PITCHES 136-227D 22.
HHCS 3/8-16X1 GR5 802-017C 23.
WASHER FLAT 3/8 SAE PLT 804-012C 24.
HHCS 1/2-13X6 GR5 802-047C 25.
TUBE RND 1 OD X 7/32W X 4.75 120-002D 26.
NUT NYLOCK JAM THIN 3/8-16 PLT 803-215C 27.
08/29/12 - 85 - 148-057P
Table of Contents Part Number Index
Drive
Lh Drive
(Applies to V-300F only)