Great Plains 2420F Parts Manual - Manual (Page 57)

Revision Comments Part Description Part No. Ref.
Image No. dwg24376
HFS 1/2-13 X 5 3/4 802-419C 1.
NUT HEX FLG. LOCK 1/2-13 PLT. 803-169C 2.
SING OPENER INNER PIVOT TUBE 198-246D 3.
PARALLEL ARM PIVOT BUSHING 817-084C 4.
SING OPENER LOWER ARM WELDMENT 198-619H 5.
Used with 1x12 Press Wheels SPRING EXT 1 5/8OD X 6.6X.177 807-116C 6.
Used with 1x10 Press Wheels SPRING EXT 1.625ODX.243X9.875 807-251C 6.
Used with 1x10 Press Wheels SPRING EXT 1.575O.D.X.225 WIRE 807-076C 6.
Used with 807-116C 6 13/16 SPRING STRAP 198-239D 7.
Used with 807-076C & 807-251C 3 13/32 SPRING STRAP 198-240D 7.
SING OPENER UPPER ARM WELDMENT 198-618H 8.
PSS OPENER MOUNT REAR WLDMT 198-614H 9.
PSS OPENER MOUNT FRONT WLDMT 198-613H 10.
END WHEEL FERTILIZER HOSE 816-037C 11.
SCREW HEX SLT10-16X1/2P.THD CT 801-002C 12.
3N-40 SEED HOSE CLAMP PLATE 196-849D 13.
20 SER SING FRT INNER PIVOT TB 198-247D 14.
CABLE TIE 2 DIA MIN - BLK 800-303C 15.
U-BOLT 5/8-11 X 7 1/32 X 6 1/2 806-053C 16.
WASHER LOCK SPRING 5/8 PLT 804-022C 17.
NUT HEX 5/8-11 PLT 803-021C 18.
05/16/12 - 57 - 288-196P
Table of Contents Part Number Index
Openers
20 Series Opener Arms & Mounts
(Applies to 1520F, 2020F-2410, 2420F only)