Great Plains 7344 Series VII Field Cultivator-Floating Hitch Parts Manual - Manual (Page 4)

Section 1: Introduction
Table of Contents ► Great Plains Mfg., Inc.
Series VII 7332-7344 Field Cultivator, Floating Hitch 560-200P 4/17/2003
1-1
General Information
Using This Manual
This manual is divided into sections. The first
section contains General Information and a Table
of Contents. The remaining sections divide the
machine into segments (i.e. Frames, Transport,
Hydraulics, etc.) which illustrate and list all parts.
The Great Plains parts in this manual are specially
designed for this machine and should be replaced
with Great Plains parts only.
The information in this manual is current at
printing. Some parts may change to assure top
performance.
Right-hand and left-hand as used in this manual
are determined by facing the direction the
machine will travel while in use.
Below is an example of two facing pages from a
parts manual. Familiarize yourself with the
contents of these pages.
Manual Replacement Information
Replacement manuals are available. Refer to your
dealer or the Great Plains Publications Catalog for
additional information.
Manual Revisions
When this manual is revised, the modification date
is printed on the front cover and on the revised
page(s).
Touch-up Paint
Repaint parts where paint is worn or scratched to
prevent rust. Aerosol touch-up paint is available.
To order use Great Plains parts numbers below:
GP Green ..........................821-001C
GP Black ..........................821-002C
GP Beige
..........................821-003C
GP Buckskin .......................821-004C