Great Plains SS1700 Parts Manual - Manual (Page 19)

Revision Comments Part Description Part No. Ref.
Image No. dwg42771
SHANK MOUNT SPRING RESET 598-004H 1.
MOUNT CLAMP 598-008H 2.
HHCS 3/4-10X3 GR8 802-552C 3.
WASHER FLAT 3/4 HARD ASTMF436 804-093C 4.
WASHER LOCK SPRING 3/4 PLT 804-023C 5.
NUT HEX 3/4-10 PLT 803-027C 6.
BUSHING 1.25ODX1.00IDX2.00 890-771C 7.
GREASE ZERK STRAIGHT 1/4-28 800-001C 8.
SPRING RESET SHANK PIVOT ARM 598-003H 9.
HHCS 1-8X8 5/8 GR5 SPTHD PLT 802-756C 10.
NUT HEX TOP LOCK 1-8 PLT 803-168C 11.
DO NOT DISASSEMBLE SPRING
PACK
SPRING RESET SPRING SUBASY 598-022S 12.
Rev. 2 HHCS 5/8-11X8 1/2 GR5 802-356C 13.
Rev. 1 Replaced by 802-356C 802-208C 13.
WASHER FLAT 5/8 HARD ASTMF436 804-095C 14.
NUT LOCK 5/8-11 PLT 803-024C 15.
Rev. 2 Used in 598-073A SHANK HOLDER 1 1/4 598-099H 16.
Rev. 1 SHANK HOLDER 1 1/4, Replaced by 598-099H 598-011H 16.
Used in 598-030A SHANK HOLDER 3/4 598-029H 16.
Used in 598-073A SPACER BUSHING 599-143D 17.
Used in 598-030A SPACER BUSHING 599-117D 17.
Includes items 4, 16-17, for 1 1/4"
Straight & Parabloic Shanks
SHANK HOLDER 1 1/4 SUB ASSY 598-073A 18.
Includes items 4, 16-17, for 3/4" No-Till
Shanks
SHANK HOLDER 3/4 SUB ASY 598-030A 18.
HHCS 3/4-10X6 GR8 802-487C 19.
HHCS 3/4-10X4 GR5 802-068C 20.
NUT LOCK 3/4-10 PLT 803-026C 21.
HHCS 5/8-11X4 GR5 802-060C 22.
07/21/14 - 19 - 596-086P
Table of Contents Part Number Index
Shank & Coulter
Auto Reset Shank Mount Assembly (S/N 1741YY-)
(Applies to SS1300, SS1700 only)