beautypg.com

14 lubricants & hydraulic oil – Great Plains Simba X-Press Operator Manual User Manual

Page 38

background image

38 Simba X-Press

601-339M-ENG

2013-02-04

Measures in case of injury

through oil
Eyes:

Should any oil be splashed into your eyes,

rinse with water for 15 minutes. If the eye is

still irritated, contact a doctor immediately

If oil is swallowed

If oil is swallowed, it is important not to induce

vomiting. Contact a doctor immediately.

Skin irritation caused by oil

In case of prolonged skin contact, wash off

the oil with soap and water.

Oil Spills

Use either sand or a suitable granular

absorbent to soak up any spilt oil. Dispose

of the oil-contaminated absorbent in the

proper manner.

Oil Fires

Never use water to extinguish an oil fire.

The oil will float on the water causing the

fire to spread.

Burning oil-lubricant must be extinguished

using a carbon dioxide powder or foam

extinguisher. Always wear respiratory

equipment when dealing with fires of this

type.

Waste Oil Disposal

Oil-contaminated waste and used oil must

be disposed of in accordance with current

legislation.

Waste oil must be collected and disposed of

in accordance with local regulations. Never

pour used oil into unsealed sewage systems

or drains or onto the ground.

5.14 Lubricants &

Hydraulic Oil

Hydraulic System

The hydraulic fluid from the tractor is mixed

with the hydraulic fluid from the machine.

The supplied machine hydraulic system

contains Total AZOLLA ZS 32 oil.

Lubricants

G

reat Plains strongly recommend the use

of

Lithium Complex EP2 Grease in the

disc and wheel hubs of your X-Press. This

grease is a Lithium Complex soap dispersed

in a mineral oil and is interpreted by IARC as

being non-carcinogenic. Grease cartridges

are available from Great Plains. Using this

grease in combination with the labyrinth type

seal it is permissible to lengthen the greasing

interval on the disc hubs to 200 hours. If

using a standard agricultural grease the disc

hubs should be lubricated every 50 hours.

All other lubricating points on the machine

can be lubricated with multigrade lubricating

grease as specified in DIN 51825 KP/2K -

40.

Advantages of Lithium Complex EP2

Grease

Excellent mechanical stability.

Excellent load carrying properties.

Wide temperature range.

Excellent oxidation stability.

Excellent water resistance.

Compatibility with other greases.

5. Servicing and Maintenance