Great Plains 2SF30 Parts Manual - Manual (Page 149)

Revision Comments Part Description Part No. Ref.
Image No. dwg16042
HFS 1/2-13X3 3/4 GR5 SPTHD 802-421C 1.
NUT HEX FLG. LOCK 1/2-13 PLT. 803-169C 2.
PRESS WHEEL PIVOT TUBE 198-137D 3.
PARALLEL ARM PIVOT BUSHING 817-084C 4.
3 X 14 PRESS WHEEL ARM 199-030D 5.
WASHER LOCK SPRING 5/8 PLT 804-022C 6.
HHCS 5/8-11X3 GR5 802-059C 7.
Includes items 9 through 17 3 X 14 PEAKED P.W. ASSEMBLY 122-117S 8.
HHCS 5/16-18X2 3/4 GR5 802-197C 9.
BRG INS .63IDX1.57OD DBL LIP 822-095C 10.
803-184 FLG TP LK 5/16-18ZNYCR 803-177C 11.
4X12 PW RIM HALF 122-041D 12.
3 X 14 RIM SPACER RING 817-063C 13.
3 X 14 PEAKED PRESS WHEEL TIRE 814-067C 14.
Includes items 13 and 14 3 X 14 TIRE & RING ASSEMBLY 122-198V 15.
LARGE SPACER TUBE 817-062C 16.
SMALL SPACER TUBE 122-110D 17.
1st rev. See item 25. RPBY 817-328C 198-104D 18.
PIN ROLL 5/32 X 5/8 PLT 805-186C 19.
(S/N 3410F- for 2SF24 and 3205G-
for 2SF30) Use only with item 21.
PRESS WHEEL ARM BUMPER 817-132C 20.
1st rev. (S/N 3210F- for 2SF24 and 3205G-
for 2SF30). See item 26.
RPBY 817-347C 812-194C 21.
SPRING .540 O.D.X 1 1/4 X.054W 807-106C 22.
PIN CLEVIS 3/8 X 2 1/8 USABLE 805-154C 23.
Includes items 18, 22, 23, 25 and 26. PW ADJUSTMENT TRUNNION ASSY 122-202S 24.
2nd rev. T-HANDLE ASSEMBLY 817-328C 25.
2nd rev. (S/N 3411F+ for 2SF24 and 3206G+
for 2SF30) Replaces items 20 and
21.
OPENER TRUNION 817-347C 26.
11/05/13 - 149 - 155-015P
Table of Contents Part Number Index
Press Wheels
3" x 14" Peaked Press Wheel (2SF24 S/N 3236F+ & 2SF30 S/N 3046G+)
(Applies to 2SF24 (1986+), 2SF30 (1986+) only)