Great Plains 606NT Parts Manual - Manual (Page 87)

Revision Comments Part Description Part No. Ref.
Image No. dwg13215
S/N VV1107+ DEPTH STOP WELDMENT 151-080H 1.
S/N VV1106- REP BY 151-080H 151-073H 1.
2nd rev. HHCS 5/16-18X3 3/4 GR5 802-119C 2.
1st rev. HHCS 5/16-18X3 1/2 GR5 802-333C 2.
WASHER FLAT 5/16 SAE PLT 804-036C 3.
Rev. 2 is not interchangeable
w/rev. 1
STOP CLAMP PAD 151-174D 4.
1st rev. Replaced by 151-174D. CLAMP SEGMENT 51000-144 4.
1st rev. Replaced by 151-174D. CLAMP SEGMENT 51000-127 5.
Rev. 2 is not interchangeable
w/rev. 1
NUT LOCK 5/16-18 PLT 803-011C 6.
1st rev. NUT, SQUARE 5/16"-18 51000-128 6.
NUT-HEX 1/4-20 PLT 803-006C 7.
WASHER LOCK SPRING 1/4 PLT 804-006C 8.
S/N VV1107+ Refer to "Stroke Control
Valve (810-445C)".
STROKE CONTROL VALVE 810-445C 9.
S/N VV1106- Refer to "Hydraulic Shut
Off Valve (810-084C)".
RPBY 810-445C 810-084C 9.
36'-45' DEPTH STOP MOUNT PLATE 172-253D 10.
HHCS 1/4-20X2 1/2 GR5 802-097C 11.
S/N VV1107+ DEPTH STOP ASSY 151-081S 12.
S/N VV1106- RPBY 151-081S 151-072S 12.
10/08/13 - 87 - 151-061P
Table of Contents Part Number Index
605 & 606 Hydraulics
Depth Stop Valve Assembly
(Applies to 605NT, 606NT only)