Great Plains P13529 - Manual (Page 27)

27 X-Press
Operating Instructions
4.5 Starting Settings
The following pages detail the recommended
starting settings for the X-Press. These set-
tings can then be used as a base for further
adjustment in order to get the optimum
performace from your machine.
Ensure all settings from the left and right hand
sides of the machine mirror each other.
Drawbar Cylinder
1x 2x
2x 1x
The drawbar cylinder shim settings are subject to the tractor drawbar height. As
such, the shim settings shown above are intended as a suggestion only. The
machine should be set to run with the chassis level to nose high depending
upon working depth..
Black
29mm
Silver
51mm
Red
10mm
Blue
7mm
4. Adjustment / Operation
1x
Yellow
20mm