Great Plains 4000TC Predelivery Manual - Manual (Page 8)

586-239Q Table of Contents Index 07/02/2013
4 1200-4000TC Table of Contents Index Great Plains Manufacturing, Inc.
Introduction
The Turbo-Chopper has been designed with care and
built by skilled workers using quality materials. Proper
setup, maintenance, and safe operating practices will
help the customer get years of satisfactory use from the
machine.
Description of Unit
The 1200-4000TC Turbo-Chopper is a one, three or five
section “vertical” tillage tool. Working width ranges from
12 to 40 feet. The implement is designed to cut and size
residue, till soil for faster seedbed warming, break up soil
crust on hard dried fields while eliminating compaction
layers.Various finishing attachments are also available to
further smooth, redistribute residue, kill weeds, and break
clods
Models Covered
Document Family
Tools Required
• Basic Hand Tools
• Torque Wrench
• Fork Truck, Overhead Hoist or Loader
Pre-assembly Checklist
1. Before assembling, read and understand “Important
Safety Information” in front part of this manual.
2. Have at least two people on hand while assembling.
3. Make sure area is level and free of obstructions (pref-
erably an open concrete area).
4. Have all major componets
5. Have all fasteners and pins shipped with machine.
1200TC 12’ (10in) spacing
1500TC 15’ (10in) spacing
1800TC 18’ (10in) spacing
2400TC 24’ (10in) spacing
3000TC 30’ (10in) spacing
4000TC 40’ (10in) spacing
586-239Q Pre-Delivery Manual (this document)
586-239M Operator Manual
586-239P Parts Manual
Figure 1
1800 Turbo-Chopper
42096