Great Plains DTX350 Operator Manual - Manual (Page 20)

20 Simba DTX
604-107M-ENG
2013-01-28
Fig. 4.02: 3 Point Linkage
4.2 3 Point Linkage
The Simba DTX is fitted with a standard
Category 3 linkage at the front of the
machine.
4.3 Tines
The Simba DTX is fitted with either Pro-Lift
or LD (Low Disturbance) tines. The tines
are arranged in a staggered formation
to give lower draft requirements and the
ability to work progressively deeper. The
tines are spaced at 400mm. Each tine is
shear bolt protected. Tine depth is achieved
by moving the tines up and down in the
adjustable clamps.
Different wings are available to suit the soil
conditions and optimise the performance
of the machine.
Fig. 4.03: Pro-Lift Tines
Standard Wing
P09060
 Maximum soil disturbance with
minimum draft requirement under
normal circumstances.
 Wing angle reduces wear rates on
leg.
Extra Lift Wing
P10392
 Increased lift height and rake angle
creates greater soil disturbance on
all soil types especially in moister
conditions.
 Lower relative distance between
edge of wing and point reduces draft
requirement.
 Has ability to work at lower depths
with no decrease in soil disturbance
or risk of smear.
Extra Wide Wing
P10411
 Improved lateral shatter in moist/wet
soils, or non-cohesive soils.
 Ideal for deep vegetable applications
under light/medium soils.
4.3.1 Pro-Lift Wings
4. Adjustment / Operation