Warranty – Great Plains P16229 Serial No 18007975 2009 User Manual

Page 4

Hydraulic Reset Flatliner

Operating Instructions

WARRANTY

TERMS AND CONDITIONS

In this warranty Simba International Ltd., is referred to as “the Company”.

1.

Subject to the provisions of this warranty the Company warrants each new machine sold by
it to be sold free from any defect in material or workmanship for a period of 12 months from
date of installation with the end-user.

Some specific items have additional warranty over and above the standard 12 months.
Details of these can be obtained upon request directly from the distributor or Simba
International Ltd.

If the machine or part thereof supplied by the Company is not in accordance with the
warranty given in clause 1 the Company will at its option:

(a)

make good the machine or part thereof at the Company’s expense, or

(b)

make an allowance to the purchaser against the purchase price of the machine or
part thereof, or

(c)

accept the return of the machine and at the buyers option either:

repay or allow the buyer the invoice price of the machine or part thereof, or

II)

replace the machine or part thereof as is reasonably practical.

This warranty shall not oblige the Company to make any payment in respect of loss of profit
or other consequential loss or contingent liability of the Purchaser alleged to arise from any
defect in the machine or impose any liability on the Company other than that contained in
clause 2.

Any claim under this warranty must be notified to the Company in writing specifying the
matters complained of within 14 days from the date of repair.

Any claim under this warranty must be made by the original purchaser of the machine and
is not assignable to any third party.

If the purchaser hires out the machine to any third party the warranty shall apply only to
matters notified to the Company in writing within 90 days of the date of delivery and clause
1 shall be read as if the period of 90 days were substituted for the period of 12 months.

The warranty will cease to apply if:

(a)

any parts not made, supplied or approved in writing by the Company are fitted to the
machine or

(b)

any repair is carried out to the machine other than by or with the express written approval
of the Company or

(c)

any alterations not expressly authorized by the Company in writing are made to the
machine or

(d)

the machine is damaged by accident or

(e)

the machine is abused or overloaded or used for a purpose or load beyond its design
capabilities, or used in conjunction with a tractor whose power output capability exceeds
the stated implement power requirement by more than 40%. For the purpose of these
terms and conditions, “stated implement power requirement” refers to wheeled tractors
unless specifically stated. These power requirements should be reduced by 20% when
used in conjunction with tracked tractors.

(f)

the machine is operated as part of a ‘cultivation train’ where more than one implement is
being towed, without the express written approval of Simba International Ltd.

(g)

any maintenance is not carried out in accordance with the service schedules in the
operator’s manual.

(h)

the Installation and Warranty Registration Certificate is not received by Simba International
Ltd., Service Dept., Woodbridge Road, Sleaford, Lincolnshire, England, NG34 7EW, within
7 days of installing a new machine.

Warranty