Great Plains PFH-20 Assembly Instructions - Manual (Page 16)

Precision Fertilizer Hitch
4/9/2004
14
Maintenance and Lubrication
Maintenance
Proper servicing and adjustment is the key to the long
life of any farm implement. With careful and systematic
inspection, you can avoid costly maintenance, down-
time and repair.
Breakaway Protection
The marker arm is attached to the marker body with a
5/16" breakaway bolt. If excessive force is put on the
marker during operation, the bolt will break, allowing the
marker arm to swing away rather than cause damage to
the marker.
NOTE: The breakaway bolt is a 5/16"-18 x 1 1/2" long
grade 5 (G.P. # 802-012C). It is identified as a grade 5 by
having three marks on the head. If it breaks, it must be
replaced by an equivalent grade 5 bolt to prevent marker
damage.
Marker Transporting
Always transport the marker with it folded in the flat fold
position.
Storage
Clean the PFH Flat Fold Marker as necessary.
1. Lubricate zerks as indicated in the lubrication sec-
tion.
2. Store the PFH Flat Fold Marker inside, if possible, for
longer PFH Flat Fold Marker life.
Disk Bearings
Type of Lubrication: Grease at the beginning of each
season.
12436
Seasonally
10
Zerks
Type of Lubrication: Grease after 10 hours of use. 20189
Zerks
Type of Lubrication: Grease after 10 hours of use.
20190
10
Lubrication