Great Plains CPH-20 Assembly Instructions - Manual (Page 2)

148-098M 5/18/2005
Great Plains Mfg., Inc.
CPH Stud Repair Kit 2
Refer to Figure 2
4. Weld CPH fix tubes on each side of pull
hitch axle frame plate.
5. Repeat step 4 on pull hitch axle frame
on opposite side of hitch.
Figure 2
CPH Fix Tubes
23221
Refer to Figure 3
6. Replace front slide block back plate with
CPH fix bar (1).
7. Secure bar (1) to front slide block (2) with
bolt and nut hex.
NOTE: If only one stud is broken, either replace
only broken stud with a 5/8" x 3" bolt and nut
hex lock provided in kit or replace both studs
with a 5/8" x 3" bolt and nut hex from kit. If both
studs are broken, replace both with a 5/8" x 3"
bolt and nut hex from kit.
8. Insert 5/8" x 6" bolt (4) through CPH fix
tube (5) and secure to CPH fix bar (1) with
nut hex (6).
9. Repeat steps 6 and 7 on pull hitch axle
frame on opposite side of hitch.
Figure 3
CPH Fix Bar
23222