Great Plains 3N-3020P Assembly Instructions - Manual (Page 2)

197-161M 8/9/2007
Great Plains Mfg., Inc.
Weight Bracket Option 2
Assembly Instructions Cont.
Refer to Figure 2
Center Brackets:
1. Install center weight brackets (1) on frame be-
tween the gauge wheel assembly and center of
the drill. Orient as shown in figure 2 so that
weights hang to the front.Do not place to close to
the transmission sprockets so as to be able to set
speeds. Use (2) 3/4-10X8 1/16X9 1/2 u-bolts, (3)
3/4 spring lock washers, and (4) 3/4-10 hex nuts.
2. Assemble weight bracket adustable leg (5) to bot-
tom of weight bracket (1) with (6) 5/8-11 X 2 1/4
bolts, (7) 5/8 USS flat washers, (8) 5/8 spring lock
washers and (9) 5/8-11 hex nut. Adjust weight
bracket leg to make weights hang level.
Note: Left and Right center weight brackets are as-
sembled in the same manner.
Qty Part No. Part Description
4 197-062D Weight Bracket Adj Leg
2 197-159H Weight Brkt Wldmt 8 Tube
2 197-160H 3N-30 Weight Brkt Assy
1 197-161M Manual 3N-30 Weight Brkt Assy
8 802-057C HHCS 5/8-11X2 1/4 Gr5
4 802-096C HHCS 1-8X2 1/2 Gr5
8 803-021C Nut Hex 5/8-11 PLT
8 803-027C Nut Hex 3/4-10 PLT
4 803-031C Nut Hex 1-8 PLT
8 804-019C Washer Flat 5/8 USS PLT
8 804-022C Washer Lock Spring 5/8 PLT
8 804-023C Washer Lock Spring 3/4 PLT
4 804-027C Washer Lock Spring 1 PLT
4 804-029C Washer Flat 1 SAE PLT
4 806-037C U-Bolt 3/4-10X8 1-16X9 1/2
1 813-027C 14X24 Woven Polypropylene Bag
197-158A 3N-30 Weight Bracket Package
Your Kit includes:
Figure 2
Center Weight Brackets 19212