Cary Audio Design SA-500.1 - Manual (Page 9)

CONTROLS AND DISPLAYS
FRONT PANEL
POWER BUTTON
The Power Button performs no function when the amplifier is powered off with the rear
panel Master Power Switch.
When the rear panel Master Power Switch is powered on, the SA-500.1 is in Standby mode.
Pressing the front panel Power Button when the rear panel master panel switch is powered
on will activate the power amplifier. When the SA-500.1 is activated, the LED above the
power button lights blue.
Note : When the status of the SA-500.1 changes, relay clicks may be audible. This is
normal.
8