Crimestopper Security Products CS-2002DPII - Manual (Page 9)

9
TRANSMITTER PROGRAMMING
NOTE: All transmitters must be learned at the time of programming. This system can learn up to 4 remotes.
1. Turn key to the ON position and press program button 4 times.
2. After a short delay, the unit will chirp and flash the parking lights 4 times.
3. Press the Button #1 (Lock) on the remote you wish to program.
4. You should get 2 chirps and light flashes indicating the unit is waiting for the second code to learn.
Press button #1 of a second transmitter, the unit will chirp and flash 3 times. Press the lock button on a
3
rd
or 4
th
transmitter for up to 4 total. Note: The unit will not flash the lights when learning the 4
th
code.
Turn key off to exit programming mode.
IGN
OFF
WAIT FOR
4 FLASHES
PRESS 4X's
FLASH 2, 3, or 4 X's
IGN
OFF
PRESS LOCK BUTTON
PANIC