beautypg.com

Glx50, Guitar amplifier with digital signal processing – Crate Amplifiers GLX50 User Manual

Page 8

background image

GLX50 TECHNICAL SPECIFICATIONS:

Output Power Rating

50 watts RMS @5% THD, 4 ohm load

Maximum Input Signal Accepted

5 volts peak-to-peak

Total System Gain

Clean Channel

70dB, all controls @10

Overdrive Channel

110dB, all controls @10

Input Impedance

270k ohm

Tone Controls

Low

28dB range @ 40Hz

Mid

20dB range @ 1.5kHz

High

27dB range @ 12kHz

CD Inputs

Maximum signal level 7.75V rms

Headphones

Minimum impedance 32 ohms

Internal Speaker

12” Crate Custom, 4 ohms, 1.5” voice coil,

30 oz. magnet

Input Power Requirements

120 VAC, 60Hz, 75VA

100/115VAC, 50/60Hz, 75VA

230VAC, 50/60Hz, 75VA

Size and Weight

19” H x 19-3/8” W x 9-1/2” D, 28 lbs.

The GLX50 is covered with a durable Tolex material: wipe it clean with a lint-free cloth.

Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.

Crate continually develops new products, as well as improves existing ones. For this reason, the specifications

and information in this manual are subject to change without notice.

www.crateamps.com

@2002 SLM Electronics, a division of St. Louis Music, Inc • 1400 Ferguson Avenue • St. Louis, MO 63133

47-383-01 • 110402

GLX50

Guitar Amplifier with Digital Signal Processing

Declaration Of Conformity

#33, Effective 01-01-2001

Manufacturer’s Name:

SLM Electronics

Production Facility:

11880 Borman Drive, St. Louis, MO 63146, USA

Production Facility:

700 Hwy 202 W, Yellville, AR 72687, USA

Shipping Facility:

1400 Ferguson Ave., St. Louis, MO 63133, USA

Office Facility:

1400 Ferguson Ave., St. Louis, MO 63133, USA

Product Type:

Audio Amplifier

Complies with Standards:

LVD:

92/31/EEC, 93/68/EEC, & 73/23/EWG

Safety:

EN60065

EMC:

EN55013, EN55020, EN55022, EN61000-3-2,
& EN61000-3-3

Supplementary information provided by:

SLM Electronics - R & D Engineering

1901 Congressional Drive, St Louis, MO 63146, USA

Tel.: 314-569-0141, Fax: 314-569-0175