Winchester Repeating Arms 1886 Supplement (Historic Manual) User Manual
Page 8
slightly off-center with respect to the bottom of the
magazine tube when fully tightened. This is not a prob-
lem. Simply rotate it into alignment. Your rifle is now
fully reassembled.
O
RDERING
P
ARTS
To order parts, please write our parts department and
furnish the following: your name, address, and tele-
phone number. Also specify the model and serial num-
ber of your gun. When we receive your request, we will
send an order form and a parts breakdown with prices.
Write to:
Parts Department
U.S. Repeating Arms Company, Inc.
275 Winchester Avenue
New Haven, Connecticut 06511-1970
CAUTION: PARTS ARE MADE FOR
WINCHESTER BRAND FIREARMS MANU-
FACTURED BY OR FOR U.S. REPEATING
ARMS COMPANY, INC., AND SHOULD NOT
BE USED IN OTHER GUNS EVEN THOUGH
MODELS MAY BE SIMILAR. IMPROPERLY
FITTED PARTS MAY BE DANGEROUS.
S
ERVICE OR
R
EPAIR
If your Winchester firearm should ever need repair or
service, please utilize one of the world-wide network of
U.S. Repeating Arms Company Authorized Repair
Centers for Winchester firearms. A list of ARCs is pack-
aged with your new gun. If you need to obtain a new list
of ARCs call us at:
1-203-789-5000
Q
UESTIONS
If you have other questions about Winchester rifles and
shotguns, call or write our Customer Service
Department:
Customer Service
U.S. Repeating Arms Company, Inc.
275 Winchester Avenue
Morgan, Utah 84050-9333
Phone: 1-800-945-5237
13
12
F
I G U R E
1 0
Tighten the locking
lever fully then lay
it down in its
normal position
along the bottom of
the magazine tube.