Winchester Repeating Arms Select - Manual (Page 23)

I NVECTOR - P LUS ™ C HOKE T UBE S YSTEM
The Select is fitted with one of the most popular and
universally accepted choke tube systems on the market:
Invector-Plus ™ . Your Select shotgun is specially designed
for this system only. Your choke tubes may be marked
“Win-Plus.” There is no difference This means:
• It has a back-bored barrel.
• It is threaded to accept Invector-Plus choke
tubes only.
The Invector-Plus system allows you to configure your
Select for the patterns and/or choke constrictions your
hunting or target situation demands. The system gives
you the most highly engineered choke tapers — designed
to produce the best possible patterns for target and field
situations. Plus, it is extremely easy to switch choke
constrictions to match your shooting conditions.
Invector-Plus tubes are compatible with steel and lead shot.
Most Invector-Plus choke tubes fit flush with the muzzle
when installed. A special choke tube wrench is provided
to remove and tighten the choke tubes.
Invector-Plus (Win-Plus) choke tubes are NOT
interchangeable with any other choke tubes on the
market including chokes listed as “Standard Invector ™ ”
or Winchester’s current line of “WinChoke ® ” choke tubes.
USE ONLY CHOKE TUBES MARKED INVECTOR-PLUS
IN YOUR SELECT. USE ONLY THE APPROPRIATE GAUGE
OF INVECTOR-PLUS CHOKE TUBES AS MARKED ON
YOUR SHOTGUN.
Failure to follow these warnings may damage your firearm
and cause injury to yourself and others. A special "Plus"
choke tube wrench is provided to remove and tighten
Invector-Plus choke tubes.
DO NOT FIRE THIS SHOTGUN WITHOUT HAVING AN
INVECTOR-PLUS CHOKE TUBE INSTALLED. PERMANENT
DAMAGE MAY RESULT TO THE THREADS.
CAUTION: WHENEVER HANDLING ANY SHOTGUN FOR THE
PURPOSE OF REMOVING OR INSTALLING A CHOKING
DEVICE, MAKE ABSOLUTELY CERTAIN THE FIREARM IS
FULLY UNLOADED, AND THE ACTION IS OPEN! NEVER
ATTEMPT TO REMOVE OR INSTALL A SHOTGUN CHOKING
DEVICE IN A LOADED FIREARM!
T UBE REMOVAL —
UNLOAD YOUR SELECT SHOTGUN FULLY. INSPECT
THE CHAMBERS TO MAKE SURE THEY DO NOT CONTAIN
ANY SHELLS.
1. Open the action and place the safety in the
“on safe” position.
21