Wi Digital Systems Wi-AudioLink Quick User Guide - Manual (Page 2)

Charging
1. Plug the AC Charger into a power socket.
2. Connect the USB Y-Split power cable to
the USB port on the AC charger.
3. Connect one of the two mini USB connectors
into the transmitter USB port.
4. Connect the second mini USB connector to
the receiver USB port.
5. The Power/Status LED will turn to solid
Red ON.
6. When charging is complete the Red LED
will turn OFF.
7. Remove the charging cable and adapter
and store in the carrying case. The battery
will last 4 to 6 hours of continuous
operation.
POWER
LINK
Mini USB
Connector
USB Port
AC Charger
USB Port
USB Connector