Wi Digital Systems Wi Sure-Fit EL Series Earset & Lavalier MIC - Manual (Page 15)

EARSET CUSTOM FITTING
Wi Sure-Fit EL Series
16
Using The Earset/Lavalier Cable Clip
The Wi Sure-Fit EL Series comes with an Earset/
Lavalier cable clip to prevent movement of the cable
from dislodging the Earset. The clip is specifically
designed to match the diameter of your cable, either
1.4mm or 2mm.
1. Locate the cable clip and gently pull the cable
down into the rubber cable channel opening on
the clip.
2. Attach the clip to the collar and leave enough
slack in the cable such that the head can turn to
both sides without tugging on the clip.
• We recommend leaving the clip attached
to the cable when possible to minimize
repetitive strain on the cable.