Waring JE2000 - Manual (Page 5)

5
CLEANING & DISASSEMBLY
CLEANING
a. Unplug the machine from electrical outlet.
b. Disassemble all the washable pieces of the machine and rinse in cold water.
Note: Never immerse or pour water on the lower part of machine containing
motor – clean motor housing using only a wet sponge.
c. It is sufficient to put each piece under cold water. Should the machine remain
unused for a long time without being washed, use warm water, mild detergent
and scrub strainer with cleaning brush provided.
d. Important: When using some types of fruits or vegetables, especially carrots, a
layer may form which can gradually close the filter. It is necessary to soak
the Filter Strainer (017963) at least once a week overnight in water with
dishwasher detergent (e.g. 8 tablespoons of “Cascade” or equivalent per gallon).
DISASSEMBLY (See Fig. A)
1. Remove plunger.
2. Unlock lock toggle bar (Rotate Up) and remove cover with pulp deflector.
3. Remove shredder and filter strainer by removing shredder hub screw, turning
it counterclockwise using tool (017978).
Note: Gently holding the top rim of the filter strainer with the opposite hand is
usually sufficient for undoing shredder hub screw, but if screw has become stuck,
we have provided a locking button.
The locking button must be firmly pressed and filter strainer rotated until
button engages. This will lock rotary shaft while required torque is applied with
Shredder Hub tool to break shredder hub screw loose.
4. Once the screw is removed, shredder, filter strainer and bowl with spout are
easily removed simultaneously by lifting vertically off the bowl.