Vocas MFC-1 Follow Focus - Manual (Page 7)

© Vocas Systems B.V. 7
1
2
Adjusting the rotation lock:
The MFC-
1 is equipped with an internal “rotation stop” that can enabled or disabled
whenever the consumer wants. In fact it has two different ways of inhibiting rotation. This
is sometimes desired when the lens doesn’t have a “hard stop” in the focus ring.
Adjusting the “rotation stop” works as follows:
1. Pull the Rotation lock knob out in the direction of the arrow.
2. Rotate the Rotation lock knob to one of the three indicated positions.
The three positions are:

Free, this position allows full rotation of the Rotation knob

Stop, this position allows for a rotation of approximately. 350 degrees.

Half, this position allows for a rotation of approximately. 180 degrees.
3. Release the spring-
loaded Rotation lock knob so that it “clicks” into one of the
three preset positions.
Rotation lock knob
Position indicator