VICI 150 Dynacalibrator - Manual (Page 15)

13
Shutdown
1. Open the permeation chamber according to the instructions in the
section called “Installing the Permeation Device(s)” on page 5.
2. Remove the permeation devices and return them to the shipping tube
with the charcoal packets.
If the device will not be used for at least a week and its total useful life in
less than a year, the device should be placed in cold storage to prolong its
useful lifetime.
Factory Repair Service
VICI provides complete repair and calibration services for Dynacalibrators.
If service is required, contact the facility indicated below for authorization
and repair specifics prior to returning your unit.
North America, South America, and
Australia/Oceania
Europe, Asia, and Africa
VICI Metronics Inc. VICI AG International
tel: (877) 737-1887
fax: (360) 697-6682
[email protected] tel: Int + 41 41 925-6200
fax: Int + 41 41 925-6201
[email protected]
Equipment should be shipped in the original or equivalent packing materials,
prepaid and insured. Include a complete written description of symptoms,
problems, or calibration requirements, as well as the name and phone
number of the person to contact for discussion of the required service.
Upon receipt, VICI will inspect the equipment and advise the contact
person of any unusual repair time or cost factors prior to starting the
work. Repaired equipment will be returned with an invoice for any
costs not covered by warranty.
Remove all permeation tubes from the chamber before
packaging and shipping the Dynacalibrator.