Valco Baby Hitch Hiker - Manual (Page 2)

Thank you for purchasing a quality VALCO product. Due to our policy of continuous product
development, this product is constantly evolving. It is possible that some features or
procedures outlined here have changed since this document was written. If you unsure of
any procedure shown here please contact your local store or VALCO direct via the web at
[email protected] to obtain the most up to date information before use.
Before assembling this product, please read the instructions carefully.
Familiarize yourself with the product construction and safety warnings; be
sure that you understand all the warnings and safety guidelines before use.
Carton Contents
3. Identify the upright leg tubes to
which you will attach the
Hitchhiker Stand.
4. Wrap the fastening strap around
the tube at a height which is
reachable by the fastening arms.
(You will notice that the strap
conforms to the size/shape of
the tube).
5. Lock the flexible tube strap in
the ridges of the screw housing.
1. Remove the fastening strap
from the frame clamp unit by
turning the screw anti-
clockwise until it is released
from the lock core.
2. Pull the fastening strap from
the frame clamp unit.
1. Insert the front swivel wheel into
the housing on the front leg.
2. Firmly press the pin into the
housing until it locks into place.
3. Repeat for the other wheel.
Your VALCO hitchhiker is designed to fit on many different types, makes and brands of
prams and stroller. While every effort has been made to cover all the different possibilities,
there may be some units that are not compatible with this product.
Assembly and Installation