Valco Baby Removing Tri-mode Seat Liner (to install Bassinet) - Manual (Page 2)

Identify the top of the seat section.
1. Locate the uppermost male snaps on the frame at
either side, beneath the adjustable handle assembly.
2. One by one, press
the top snap on each
side of the liner (female
snap) onto the
corresponding snap on
the stroller frame.
3. Locate the securing straps on either side, beneath the
liner, at about where the seat section meets the
footrest flap.
4. Insert the “male”
section into the
“female” housing
until you hear a
“click” indicating it is
securely engaged.
5. Tighten the strap
as much as possible
by pulling on the
loose strap end.