Valco Baby Astro High Chair User Manual

Page 2

HIgH CHAIR ASSEMBLY/OPENINg

CONTENTS

FIgURE A

1. Your Astro High Chair arrives flat packed and

complete. It requires no frame assembly. Remove

all parts of the High Chair from the carton and

packaging. Dispose of any packaging thoughtfully

and responsibly.

OPENINg THE HIgH CHAIR

FIgURE B
2. Place your Astro High Chair flat on the floor.
3. grasp the the center back of the seat. Using an

upward motion, raise the Astro High Chair until it

‘click’s into place.

NOTE: YOU MAY NEED TO PLACE YOUR FOOT ON THE LOWER

FRAME TO HOLD THE UNIT IN POSITION WHILE LIFTING.

4. Lower the footrest into position by pushing it down

until it locks into place.

IMPORTANT WARNING: ALWAYS TEST THAT ALL LATCHES ARE

SECURELY ENGAGED BEFORE USE.

FOOD TRAY

FIgURE C

The Food Tray on your Astro High Chair

has three adjustment positions and can be removed

for easy cleaning.

CLEAN THE FOOD TRAY WITH WARM WATER AND MILD

DETERGENT. DO NOT PLACE IN THE DISHWASHER.

5. To attach or remove the Food Tray, locate the

release levers found on the underside on each

side of the tray.

FIgURE D
6. While squeezing the release levers

simultaneously, slide the tray into position over the

side seat armrests. Release the levers and move the

tray slightly forward or backward until it locks into the

next position.
7. Use the release levers to adjust the tray position,

or to remove the tray unit.

WARNING: DO NOT FORCE TRAY INTO CHILD WHEN

ADjUSTING THE TRAY. ALWAYS ALLOW SUFFICIENT

BREATHING SPACE FOR YOUR CHILDS’ COMFORT.