Quick start guide, Di140, Unpack – Unger DI140 User Manual
Page 6: Assembly and set up
www.ungerglobal.com
6
3
1
2
4
5
6
H
i
F
lo
™ Di140
Quick Start Guide
Thank you for your purchase of the Unger DI140 water system.
This guide will help you get setup and using your system right away.
1. Unpack
Make sure that you have all the parts listed below and access to a hose
bib (water supply):
2. Assembly and Set Up
(NOTE: Assembly requires a crescent wrench.)
1. Wrap teflon tape (part #2) at least 2 times clockwise around the thread of the
hose adapter (part #1, longer end) and on/off valve threads (part #6).
2. Assemble Fittings
a. Screw in on/off valve assembly (part #6) on input side.
b. Insert the teflon tape-wrapped end of hose adapter
(part #1) into the output side of the system.
Tighten with crescent wrench (24 size).
Part Number
Qty.
Description
1
1
Hose Adapter
2
1
Roll of Teflon Tape
3
2
Blue Housing
4
2
Cartridge, pre-filled with resin
5
1
Housing Wrench
6
1
On/Off Valve assembly
INPUT
OUTPUT