Triton MOF 001 - Manual (Page 2)

2
GB
CONTENTS
SPECIFICATIONS
Part no: MOF001
Voltage: EU - 220V - 240V AC, 50/60Hz
SA - 220V - 240V AC, 50/60Hz
AU - 220V - 240V AC, 50/60Hz
USA - 120V AC, 60Hz
JP - 100V, 50/60Hz
Input power: 1400W / 2 1 ⁄
4
Peak hp
No load speed: 8,000 to 20,000rpm variable
Collet: EU - 1 ⁄
4
" & 8mm
SA - 1 ⁄
2
" & 1 ⁄
4
"
AU - 1 ⁄
2
" & 1 ⁄
4
"
JP - 1 ⁄
4
" & 8mm
USA - 1 ⁄
2
" & 1 ⁄
4
"
Plunge adjustment: 1) Free Plunge
2) Table Height Winder
3) Micro Adjuster
Plunge Range: 59mm / 2 5 ⁄
16
"
Insulation class: Double insulated
Net weight: 4.7kg / 10.4lbs
Sound and vibration information:
Sound pressure L
PA
: 85.4dB(A)
Sound power L
WA
: 96.4dB(A)
Uncertainty K: 3dB
Weighted Vibration a
h
: 4.300m/s 2
Uncertainty K: 1.5m/s 2
Thank you for purchasing this Triton tool. Please read these instructions: they contain information necessary for safe and
effective operation of this product. This product has a number of unique features and, even if you are familiar with similar
products, reading the instructions will help you get the full benefit of its unique design. Keep these instructions close to
hand and ensure all users of this tool have read and fully understand them.
Contents / Specifications
Specifications 2
Features 3
Safety 4
Symbols 6
Functions 6
Hand-Held Operation 8
Table-Mounted Operation 9
Service 10
Troubleshooting 10
Warranty 11
Declaration of Conformity 62
As part of our ongoing product development, specifications of Triton
products may alter without notice.
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds
85dB(A) and limit the time of exposure if necessary. If sound levels are
uncomfortable, even with ear protection, stop using the tool immediately
and check the ear protection is correctly fitted and provides the correct
level of sound attenuation for the level of sound produced by your tool. WARNING: User exposure to tool vibration can result in loss of sense of
touch, numbness, tingling and reduced ability to grip. Long term exposure
can lead to a chronic condition. If necessary, limit the length of time exposed
to vibration and use anti-vibration gloves. Do not operate the tool with hands
below a normal comfortable temperature, as vibration will have a greater
effect. Use the figures provided in the specification relating to vibration to
calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according
to EN60745 or similar international standards. The figures represent
normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased levels of
noise and vibration.
www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users
who use tools for long periods of time.
MOF001_23/04/13.indd 2 27/08/2014 10:39