TeachLogic Maxim III - Manual (Page 19)

13
blank page
fire alarm input
page pass through - fire alarm contacts
The 2 pin orange Phoenix connector labelled Fire Alarm, was designed to
provide an emergency mute of the TeachLogic amplifier. When interfaced to
the fire alarm relay contact output, all audio devices (microphones, dvd, etc.)
will turn SILENT. In the event of a fire, this will help to lower the overall decibel
levels and help students and staff hear the audible fire alarm tones/instruction
within the classroom. This feature only requires a 5-24 volt AC or DC source.