TDK TVT1001 - Manual (Page 30)

30
Turntable does not operate.
1. Make sure the AC cord is plugged into an AC outlet
and that the AC outlet is “live.” Also make sure that
the DC plug is attached to the turntable.
2. Check the drive belt to make certain it is on
correctly (see page 9).
3. Make sure the 33/OFF/45 control is set to either
33 or 45.
Turntable operates, but no sound is heard.
1. The stylus guard is still in place.
2. The Cue Lever is raised.
3. If connected to a Home Stereo, Amp, etc, it is
possible that the external unit’s controls are set
incorrectly, i.e., tape monitor on, speakers switched
off, etc.
4. Check the stylus on phono cartridge for correct
placement. If not positioned correctly, see page 18.
Turntable operates, but sound is very low.
1. Either make sure the turnable is connected to
powered (AUX) jacks or set the PRE-AMP switch
to the ON position.
(See page 12 for the Warning regarding the PRE-
AMP switch.)
2. The volume of the external device this turntable
is connected to is not set high enough.
3. The stylus is broken or missing.
TROUBLESHOOTING GUIDE
Many issues can be resolved by the following:
• unplugging and re-plugging in the turntable
• downloading the latest software
• restarting the computer
For detailed troubleshooting of the TDK Life on Record Vinyl Recorder software, please refer to its manual.
You can download the complete user’s manual at http://www.cakewalk.com.